Output Data - WAGO 767-5803 Manual

WAGO-SPEEDWAY 767
767-5803 8DIO 24V DC 0,5A (8xM12)
Byte 6
Byte 7
8.5.2

Output Data

The image for the process data, which are transmitted by the fieldbus coupler to
the I/O module, has a size of 4 bytes. If you configure a synchronous diagnostic
confirmation of the I/O module, the process image has a size of 6 bytes.
The process data and the diagnostic confirmation are structured as follows:
Manual
Version 1.1.0
7
| | | | |
| | | | |
| | | | |
| | | | | 1
| | | | 1 : Overtemperature on channel 4
B
| | | 1 : Overtemperature on channel 5
B
| | 1 : Overtemperature on channel 6
B
| 1 : Overtemperature on channel 7
B
1 : Overtemperature on channel 8
B
7
\ /
-------- -------- |
\/
| |
| |
| | 1
| 1 : Undervoltage U
B
Not assigned: always 0
0
Diagnostic message
| | |
| | 1 : Overtemperature on channel 1
B
| 1 : Overtemperature on channel 2
B
: Overtemperature on channel 3
B
0
Diagnostic message
| | |
| | 1 : Short circuit/overload field supply
B
| always 0
: Undervoltage U
B LS
A
Process Image 77