Direct Mounting On Your System; Figure 8: Mounting The Module On The Grounded System - WAGO 767-5803 Manual

8dio 24v dc 0,5a (8xm12) digital input/output module dc 24 v, 0,5 a for wago-speedway 767 series

Table of Contents

WAGO-SPEEDWAY 767

767-5803 8DIO 24V DC 0,5A (8xM12)

Pos : 21.10 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Direktmontage 767- xxxx allgemei n_1 @ 5\mod_1249029032515_21.doc x @ 39651 @ 2 @ 1

4.3

Direct Mounting on Your System

Mount the module directly on a level surface of your system, without using

WAGO accessories. Direct mounting of the module is to be carried out as follows:

Disconnect the power supply from those devices on which you wish to

mount the module.

Mark the drill holes using the hole drilling template printed on the

packaging. You can also hold the module in the desired position and mark

the drill holes. Ensure that there is sufficient space around the 767 Series

components to enable you to connect all cable without problems.

Pos : 21.11 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Hinweis/Hi nweis : 767- xxxx Distanz stüc k @ 8\mod_1279025151416_21.doc x @ 59810 @ @ 1

Direct Mounting

We recommend using WAGO spacers for compact direct mounting. If these are

used, the resulting additional distance from the second 767 Series component is to

be noted. See section "Mounting the Module" > "Mounting the Spacer in the Case

of Compact Arrangement".

Pos : 21.12 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Direktmontage 767- xxxx allgemei n_2 @ 8\mod_1279025380479_21.doc x @ 59813 @ @ 1

Fasten the module with two M4x12 screws via the two mounting holes.

Pos : 21.13 /Serie 767 ( WAGO-SPEED WAY)/Monti eren/I/O-M odule/Montage_Direktmontage 767- xxxx_8xM 12 - Bil d @ 11\mod_1317371994037_21.doc x @ 80380 @ @ 1