Safety Advice (Precautions) - WAGO 767-5803 Manual

8dio 24v dc 0,5a (8xm12) digital input/output module dc 24 v, 0,5 a for wago-speedway 767 series

Table of Contents

Important Notes

Pos : 16.12 /Alle Serien (Allgemeine M odul e)/Übersc hriften für all e Seri en/Wic htige Erl äuter ungen/Sic her heitshi nweis e - Ü berschrift 2 @ 6\mod_1260180299987_21.doc x @ 46724 @ 2 @ 1

2.2

Safety Advice (Precautions)

Pos : 16.13 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Gefahr/Gefahr: El ektrisc he Spannung @ 8\mod_1278307980373_21.doc x @ 58901 @ @ 1

Electric voltage!

Operate the 767 Series components exclusively with 24 VDC PELV (Protective

Extra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sources. Failure

to comply may result in electric shock.

Pos : 16.14 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Vorsicht/Vorsic ht: Heiß e Ansc hluss buchsen @ 8\mod_1278308217203_21.doc x @ 58913 @ @ 1

Hot connection sockets!

Even when taking into account derating, high surface temperatures on the metallic

connection sockets and on the enclosure can arise during operation. If the 767

Series component has been in operation, allow it to cool off before moving it.

Pos : 16.15 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Höchs te Strombel astbar keit der Vers orgungs kontakte @ 8\mod_1278308653219_21.doc x @ 58916 @ @ 1

The highest current carrying capacity of the supply contacts is 4 A!

Always observe the maximum current carrying capacity per supply line (U

for each 767 Series component and the overall power consumption for all

767 components. Neither of these values shall exceed 4 A since an increase in

current causes the contacts to overheat and damages the 767 Series components.

Information regarding the power demand of each 767 Series component can be

found in the corresponding data sheet, which is available from www.wago.com.

Pos : 16.16 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sic herheits hinweise/Ac htung/Ac htung: Offene Ans chl üss e @ 8\mod_1278308159953_21.doc x @ 58910 @ @ 1

Exposed connections!

If connections have not been closed with protective caps, liquid or dirt can

penetrate the components of the 767 Series module and ruin it. Therefore, close

all unnecessary connections with protective caps, which must be ordered

separately, in order to maintain the IP67 degree of protection. (See section

"Accessories" of the fieldbus coupler/controller manual.)

Pos : 16.17 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/I/O-Modul /Sic her hei tshi nweise 767- xxxx_2 @ 7\mod_1267623532771_21.doc x @ 51669 @ @ 1

•

Disconnect the power supply from the system on which you wish to mount

the 767 Series device.

•

Observe the appropriate accident prevention regulations for your system

during assembly, start-up, maintenance, and repairs. For example, BGV A3,

"Electrical systems and equipment".

•

The operating instructions for the 767 Series module and the system

description must be laid out ready on site.

•

Observe the exact positioning (coding) between plug and socket.