Do Module" Mode; Table 33: Overview Of Adjustable Parameters For The Digital Outputs - WAGO 767-5803 Manual

58 Parameterizing
7.2.2

"DO Module" Mode

Table 33: Overview of adjustable parameters for the digital outputs

Parameter
Function mode
Designation
Output value
Process image value
Signal inverting
Substitute strategy
Substitute value
Manual operation
Simulation diagnostics
Description
Mode display
Electronic marking field (max. 40 characters).
The output state is indicated in this field.
This field indicates the value of the output process image for this output.
When manual operation is activated, the field becomes a checkbox.
Activate this checkbox in order to output the state "1" on the output
independently from the control unit.
Here you can release the current process value as an inverted output
value.
Checkbox unselected*:
Output signal is released as indicated in process image
Checkbox selected:
Output signal is released in an inverted manner as indicated in process
image
This releases the substitute value or the last output value in cases such as
a disruption of the fieldbus. You have the following options:
- Switch to substitute value*
- Retain last value**
Enter the process value that is output in case of error. In case of error
(e.g., fieldbus interruption), the value is used with the "Switch to
substitute value" substitute value strategy.
Checkbox unselected:
0*
Checkbox selected:
1
Activate this checkbox to define the output value independently from the
control unit. When manual operation is activated, the field for the process
image value becomes a checkbox for the manual operation value.
Activate this check box to switch on the diagnosis simulation. When the
simulation is switched on, the fields for the diagnoses become
checkboxes.
WAGO-SPEEDWAY 767
767-5803 8DIO 24V DC 0,5A (8xM12)
Manual
Version 1.1.0