Output Data; Table 43: Dio Output Data In The Process Image - WAGO 767-5803 Manual

72 Process Image
8.3.2

Output Data

The image for the process data, which are transmitted by the fieldbus coupler to
the I/O module, has a size of 1 byte. If you configure a synchronous diagnostic
confirmation of the I/O module, the process image has a size of 3 bytes.
The process data and the diagnostic confirmation are structured as follows:

Table 43: DIO output data in the process image

Byte 0
Byte 1
Byte 2
7
\
----------------- -----------------
\/
1 : Input value = True
B
7
| | | | |
| | | | |
| | | | |
| | | | | 1
| | | | 1 : Overtemperature on channel 4 confirmed
B
| | | 1 : Overtemperature on channel 5 confirmed
B
| | 1 : Overtemperature on channel 6 confirmed
B
| 1 : Overtemperature on channel 7 confirmed
B
1 : Overtemperature on channel 8 confirmed
B
7
\ /
-------- -------- |
\/
| |
| |
| |
| | 1
| 1 : Undervoltage U
B
Not assigned: always 0
767-5803 8DIO 24V DC 0,5A (8xM12)
0
Digital outputs (process data)
/
0
Diagnostic confirmation
| | |
| | 1 : Overtemperature on channel 1 conf.
B
| 1 : Overtemperature on channel 2 confirmed
B
: Overtemperature on channel 3 confirmed
B
0
Diagnostic confirmation
| | |
| | 1 : Short circuit/overload
B
| | field supply confirmed
| Not assigned
: Undervoltage U
B LS
confirmed
A
WAGO-SPEEDWAY 767
confirmed
Version 1.1.0
Manual