Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
10
Materials from Fire Extinguishing and
Prerequisites
The pre-fab. modules have been installed.
Context
Protection materials are installed for fire extinguishing and monitoring devices to prevent
them from falling off or being damaged due to strong vibration during FusionModule1000
transportation.
Preparations
Tools: step ladder
Materials: none
Documents: fire extinguishing device layout diagram, monitoring device layout diagram
Skill requirement: common technician
Procedure
Step 1 Understand the internal layout of the FusionModule1000 by referring to the fire extinguishing
device layout diagram and monitoring device layout diagram.
Step 2 Remove the transport protection materials from the top of the aisles inside the
FusionModule1000.
Table 10-1 Transport protection materials to be removed
No.
Issue 03 (2020-06-09)
Removing Transport Protection
To prevent damage to aisle floors in the FusionModule1000, you are advised to remove the protective
films after the FusionModule1000 is installed.
Copyright © Huawei Technologies Co., Ltd.
10 Removing Transport Protection Materials from Fire
Extinguishing and Monitoring Devices
Monitoring Devices
Device
Protection Materials
79
Advertisement
Table of Contents
