FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
(1) Threaded adapter
Step 5 (Optional) Install the electrical actuator.
Do not install the electrical actuator when installing the fire cylinder for the first time. Install the
electrical actuator when commissioning the fire extinguishing system.
1.
Issue 03 (2020-06-09)
Figure 8-22 Positions of the threaded adapter and high-pressure hose
Verify that the electrical actuator ejector is reset. If the ejector is not reset, press down
the ejector, as shown by (1) in
ejector is pressed down.
Copyright © Huawei Technologies Co., Ltd.
8 Installing Devices Inside Pre-fab. Modules
(2) High-pressure hose
Figure
8-23. (2) in
Figure 8-23
shows the effect after the
69