Optional) Installing Awnings - Huawei FusionModule1000A Installation Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
Figure 5-2 Installing the external cable tray
----End

5.2 (Optional) Installing Awnings

Prerequisites


Context
An awning must be installed on the top of the main entrance door to prevent rainwater from
entering the pre-fab. module when the door is open.
Preparations
Tools: socket wrench, Phillips screwdriver, glue gun, step ladder
Materials: awning, awning mounting plate, rubber pad, white sealant, awning bolt
Skill requirement: common technician
Issue 03 (2020-06-09)
The pre-fab. modules have been installed.
The position for installing the awning has been specified.
Copyright © Huawei Technologies Co., Ltd.
5 Installing External Accessories for Pre-fab. Modules
34