Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
Figure 8-1 Installing mounting ears
Step 3 Push the battery pack onto the guide rails, and secure the battery pack to the cabinet rack rails
using mounting ears and screws.
Figure 8-2 Installing a battery pack
Step 4 Install other battery packs in the same way.
Step 5 Connect cables between battery packs based on the battery pack wiring diagram.
----End
Follow-up Procedure
Verify the battery pack cable connections. Ensure that the battery pack quantity and cable
connections comply with the design and the cables or copper bars are reliably installed.
Issue 03 (2020-06-09)
Copyright © Huawei Technologies Co., Ltd.
8 Installing Devices Inside Pre-fab. Modules
51
Advertisement
Table of Contents
