Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
Figure 5-1 Composition of the external cable tray
(1) Long cable tray
(4) M10 bolt assemblies
Procedure
Step 1 Locate the external cable tray installation position, and remove the rubber plugs from the
corresponding mounting holes in the pre-fab. module using a Phillips screwdriver.
Step 2 Secure the short cable tray to the ports reserved on the pre-fab. module.
Issue 03 (2020-06-09)
(2) Short cable tray
(5) M8 bolt assemblies
Copyright © Huawei Technologies Co., Ltd.
5 Installing External Accessories for Pre-fab. Modules
(3) Fastener
33
Advertisement
Table of Contents
