Removing The Cabinet Sliding Base Fasteners - Huawei FusionModule1000A Installation Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide

7.2 Removing the Cabinet Sliding Base Fasteners

Prerequisites
The pre-fab. module has been installed and secured.
Preparations
Tool: adjustable wrench
Materials: none
Documents: none
Skill requirement: common technician
Context


Procedure
Step 1 Remove the bolts securing the cabinet sliding base fasteners using an adjustable wrench, and
remove the fasteners.
Figure 7-5 Removing the cabinet sliding base fasteners
Issue 03 (2020-06-09)
The cabinets inside a pre-fab. module can be slid forward or backward on sliding bases.
To prevent cabinets from sliding during pre-fab. module transportation, two fasteners are
secured to the front and rear of the cabinet sliding base respectively. After the pre-fab.
module is installed and secured, the fasteners need to be removed.
Copyright © Huawei Technologies Co., Ltd.
7 Removing Transport Protection Materials
46