Configuration
1 During the calibration period, the word "CAL"
replaces the O
value in the oxygen monitoring
2
window. Calibration time is approximately
15 seconds. Upon successful completion of the
calibration, the O
2
restored.
If the O
sensor cannot be calibrated, replace the
2
O
capsule in the O
sensor housing (see
2
2
page 185).
If the O
sensor still cannot be calibrated, call
2
DrägerService or your local authorized service
organization.
Des Comp On/Off
This parameter is used to activate or deactivate
desflurane compensation.
2 Press the »Des Comp Off« soft key in the
Setup window. The key label changes from
»Des Comp Off« to »Des Comp On«, and des-
flurane compensation is activated.
146
measurement value will be
2
Instructions for Use Fabius plus SW 3.n
1