Standby Setup Screen - Dräger Fabius plus Instructions For Use Manual

Configuration

Standby Setup Screen

Pressing the Setup key while in Standby provides
access to various default and configuration set-
tings. The settings made in this screen will be
saved as Site Defaults.
In order for these settings to go into effect, press
the »Restore Site Defaults« key on the Standby
screen. The Site Defaults are also restored any
time power is cycled or the system test is performed
(see page 123).
1 Press the » « key (Setup) while in Standby
mode.
The operator is requested to enter a four-digit pass-
word in order to prevent unauthorized changes to
the basic functions. This password is allocated
when commissioning the workstation. If desired,
DrägerService can set an individual password or
disable this functionality.
Select and confirm the figures successively
from the line displayed using the rotary knob.
The Standby Setup screen replaces the
Standby screen. The cursor allows the user to
select »Default Settings« (see page 131) or
»Configuration« (see page 137). (Selecting
and confirming the return arrow on the right of
the Setup screen will exit the Standby Setup
screen and redisplay the Standby screen.)
130
Instructions for Use Fabius plus SW 3.n
1