Date Change; Start/Stop - Ingeteam Ingecon Sun Smart TL User Manual

Ingeteam Energy, S.A.
10:22
LANGUAGE SELECTION
Spanish
English
German
Italian

3.7. Date change

This menu can be used to change the current time and date.
The internal clock automatically changes between summer and
winter time.
OK
Each time the key is pressed, the top of the display flashes
in the following order: hour; minutes; day; month; and year, to
show the present value.
Use the up and down keys
the value of any part of the time or date. By clicking on
when the year is flashing, the new date and time are changed.
The following message is then displayed:
Click on OK once more, to confirm the selection.

3.8. Start/Stop

This menu can be used to manually start or stop the operation
of the inverter.
The Run or Stop status will not change even if the power supply
to the inverter is cut off.
Click on OK to change from one status to the other. The follow-
ing message will be displayed:
Select the desired option and click again on
The stop status is maintained until the menu is accessed once
more.
22
14/04/11
and respectively, to change
OK
OK
.
10:22
LANGUAGE SELECTION
Language ENGLISH
Continue?
OK
10:22
MAIN MENU
Monitoring
Configuration
Language
Change date
10:22
CHANGE DATE
Confirm (OK)
Cancel (ESC)
10:22
MAIN MENU
Change date
Start/Stop
Partial Data Reset
Change inv number
10:22
START/STOP
Change to Stop (OK)
Cancel (ESC)
User manual
14/04/11
14/04/11
14/04/11
14/04/11
14/04/11
AAY2000IKE03