Communicating With The Projector; Connecting To The Projector Rs232 In Port; Rs232 Communication Parameters - Christie GS Series Technical Reference

Communicating with the
projector
Understand the information and procedures for communicating with the projector from a remote
location.
You can communicate with the projector through the RS232 IN port or the Ethernet port. When
connecting the projector to a computer, use a direct connection. Docking ports can cause software
upgrade failures.

Connecting to the projector RS232 IN port

Communicate with the projector through the RS232 IN port.
1. Connect one end of a null standard nine-pin female to female modem cable to the projector
RS232 IN port.
2. Connect the other end of the null standard nine-pin female to female modem cable to a
computer.
3. Connect PIN 2 to PIN 3, PIN 3 to PIN 2 and PIN 5 to PIN 5.

RS232 communication parameters

The RS232 IN port has several communication parameters.
Parameter
Default baud rate
Parity
Data bits
Stop bits
Flow control
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Value
115200
None
8
1
None
7