HikRobot SC2000 Series User Manual page 73

Note
After creating a new solution, if you do not change the default solution name (unnamed_solution),
you cannot save it.
In Enable Running Items, you can set the solution continuous running interval.
Note
It only takes effect when the Trigger Mode is OFF.
If you have enabled technician permission, you can click View in Permission Assignment to check
All to open all modules to technician, or check specific one to assign it to technician.
Note
You need to go to System → User Management → Technician → Open Module to enable
technician permission first.
In Result, if you have used logic tool in your solution, you can view and link the result of logic
module to the solution.
Note
You can link only one logic module result at one time.
After editing solution name, setting continuous running interval, and so on, you can click Save to
save the solution, or click Download to download the solution to the PC.
SC2000 Series Vision Sensor User Manual
Figure 8-45 Solution Completion
64