Ftp - HikRobot SC2000 Series User Manual

the device will output. Output (NG) means when the solution result is NG, the device will
output.
NPN/PNP
It sets output signal as NPN Mode or PNP Mode.
In display interface, enable Display Test to set text's color, front size, transparency, position X, and
position Y.

8.5.6 FTP

In FTP communication, set the image file of the device as File Info., and set the previous module
status as Input Status.
When using FTP as communication tool, you need to set target IP, target port, user name,
password, image saving, frame index, result, start tag and end tag, and separator according to
actual solution demands.
Target IP and Port
It refers to the IP and Port of FTP server.
User Name
Enter user name to log in FTP.
Password
Enter password to log in FTP.
Image Saving
SC2000 Series Vision Sensor User Manual
Figure 8-43 IO Communication
62