HikRobot SC2000 Series User Manual page 5

The device should be used in compliance with local laws, electrical safety regulations, and fire
prevention regulations.
Power Supply
 When wiring or dismounting, make sure that the device power is cut off, and do not operate
under electrification.
 Avoid contact with exposed circuit. When the device is powered on, avoid contact with
exposed junctions and parts.
 Use the power adapter provided by the regular manufacturer.
 Do not connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
 Make sure the plug is properly connected to the power socket.
Transportation
 The device contains precision optical components and electronic components. During
transportation, storage and installation, incorrect operations like heavy pressure and violent
vibration should be avoided. Otherwise, the device may be damaged.
 Avoid sudden collision, and pack the device with the accompanied carton and cushioning
material or similar package.
Using Environment
 In order to reduce the risk of fire or electric shock, do not let the device get wet or damp.
 Do not drop objects onto the device and avoid vigorous vibration.
 Keep the device away from magnetic interference.
 Do not use the device in extremely heat, extremely cold, dusty environment, corrosive
environment or high humidity environment.
 Do not aim the device lens at objects of strong light, such as the sun and incandescent lamp.
Otherwise, the lens may be damaged.
 The device should be stored in dry environment without corrosive gas. Avoid placing the
device in direct sunlight and poorly ventilated locations, or near heat sources such as heater
or heating (ignoring this warning may lead to fire hazards).
 Do not operate in explosive environment.
 Keep the surrounding area well ventilated to avoid heat accumulation. Do not contact the
radiator directly to avoid scald.
Electrostatic Protection
 Remove all conductive objects (such as jewelry, watch, etc.) on the device body before
touching the device, and touch the grounding metal bracket by hand to release the static
electricity.
 It is suggested to wear anti-static suit to prevent damage to the equipment caused by static
electricity.
 When installing or maintaining the device, wear anti-static wristband or anti-static gloves.
SC2000 Series Vision Sensor User Manual
iv