Leica 3D Disto User Manual page 18

LEDs and Buttons
LDM Laser
18
Button/LEDs
ON/OFF button
010732_001
LEDs for 3D Disto status
010731_001
LED for battery status
010733_001
Status of Laser Beam
OFF
ON
010734_001
Flashing
Description
Button to turn instrument ON or OFF.
Instrument turns OFF after 15 minutes if
not connected to the PC.
Green and orange LEDs light up
•
continuously: 3D Disto is booting.
Orange LED flashes: Self-levelling
•
procedure is running or tilt > 3°.
Green LED flashes: 3D Disto is ready
•
for measurement. Tilt sensor is on.
Orange LED lights up continuously:
•
An error occurred. Refer to "7 Error
Messages".
Green and orange LEDs light up
•
continuously: Press the ON button
to reset the instrument.
For experts only: Tilt sensor off
Green LED flashes once; orange LED
three times.
If instrument is on and connected to the
charger:
Green LED flashes 1x: Battery is
•
charged to 25%.
Green LED flashes 2x: Battery is
•
charged to 50%.
Green LED flashes 3x: Battery is
•
charged to 75%.
Green LED is on: Battery is fully
•
charged.
Description
Pointfinder is OFF or 3D Disto targets
automatically.
Pointfinder is ON or user is targeting by
Remote Control.
To indicate the precise position of a pro-
jected point.
Description of the System