Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Leica Roteo 20HV
Summary of Contents for Leica Roteo 20HV
- Page 1 Roteo 20HV/25H/35/35G Roteo 20HV/25H/35/35G User Manual User Manual Version 1.2...
- Page 2 Roteo 35/35G: Roteo 25H: Roteo 20HV: R R C R R C 3 5 0 3 5 0...
- Page 3 30 meters (100 feet) 30 meters (100 feet) 30 meters (100 feet) 30 meters (100 feet) X-Axis Y-Axis...
-
Page 4: Introduction
All trademarks are the property of their respective Enter the model and serial number in your manual and owners. always refer to this information when you need to contact your agency or Leica Geosystems authorized service workshop. Type: ____________ Serial no.: ____________ Note: There are drawings on the first and last page of the user manual. -
Page 5: Table Of Contents
Set-up for squaring or establishing 90° angles Features (Roteo 20HV/35/35G) ..........9 Accessories ............... 9 The Roteo laser from Leica Geosystems offers the inte- RC-350 Remote Control .......... 9 rior contractor many great features to make your work RRC-350 Receiver/Remote Control ......9 easier and more accurate. -
Page 6: Laser Overview {A
10) LED’s – X/Y Axis Level Indicators (2) – Green (self- The laser can be mounted on a 5/8"-11 tripod or placed leveling), Red (manual) directly on its back (opposite the handle) on a solid, 11) LED – Motorized Mount Enabled Basic Operation Roteo 20HV/25H/35/35G - 1.2.0en... -
Page 7: Button Functions
Please refer to the Roteo 20HV/25H do not feature all buttons {B} as Roteo chart below to better understand their functionality. 35. Refer to RC350 section later to see how to use RC350 instead of the {B} buttons. -
Page 8: H.i. Alert Mode
(Roteo 35/35G). The scanning beam can be moved to the right or left On Roteo 20HV and 25H models all LEDs will be on using the Counter-clockwise / Clockwise (CCW/CW) continuously when disturbed in H.I. mode. rotation keys {B-6 and B-7}. -
Page 9: Wall Mount {D} (Roteo 20Hv/35/35G)
Wall Mount {D} (Roteo 20HV/35/35G) Maximum movement When the beam is at 0 on the adjustable plate, the laser can be raised a maximum of 50 mm (2") and lowered a See the inside, front cover for illustrations of the Wall maximum of 60 mm (2.25"). - Page 10 Auto/Manual key {Roteo 35/ be tilted in either one or both planes. 35G: B-1, Roteo 20HV/25H: E-3} for three seconds. Roteo 20HV/25H: The X-axis LED {B-10} above the To use the laser in full manual mode: key will blink green slowly while leveling.
-
Page 11: Set-Up For Ceiling Work
{G} in the back, inside cover of this manual. To attach the laser and wall mount to the first piece of perimeter ceiling grid (Roteo 20HV/35/35G): Set-up for layout or floor work Flip down the support plate {D-8}... -
Page 12: Set-Up For Squaring Or Establishing 90° Angles (Roteo 20Hv/35/35G)
5) Minus – Head Speed / Scan Width / Motorized Mount Set-up for squaring or establishing The performance of CCW/CW and Plus/Minus keys is 90° angles (Roteo 20HV/35/35G) dependent on the mode of operation selected. Please refer to the table in "Button Functions" on page 4 to The Roteo has a plumb beam that projects from the top better understand their functionality. -
Page 13: R-250 Receiver
The R-250, delivered with Roteo 25H, has all receiver Insert two fresh alkaline batteries (D size or LR20), functions of RRC-350 without the remote control func- following the polarization indicated at the bottom of the Roteo 20HV/25H/35/35G - 1.2.0en Batteries... -
Page 14: Using Rechargeable Nimh Batteries
± 3 mm (± 1/8") from the center. the instrument and work as it progresses. • The laser is adjusted to the defined accuracy specifi- cations at the factory. It is recommended to check Check and Adjust Roteo 20HV/25H/35/35G - 1.2.0en... -
Page 15: Checking Vertical Accuracy
Press a CCW/CW key {B-6 or B-7, hidden on Press a CCW/CW key {B-6 or B-7, hidden on Roteo 20HV} to adjust the beam up or down. Five Roteo 20HV} to adjust the beam up or down. Five presses of the key will move the beam approximately presses of the key will move the beam approximately 1.5 mm at 30 meters (1/16"... -
Page 16: Adjusting Vertical Accuracy - The Z-Axis
{B-2} to start rotation mode. Press a CCW/CW key {B-6 or B-7, hidden on Roteo 20HV} to adjust the beam to the plumb line. Twenty-five presses of the key will move the beam approximately 1.5 mm at 6 meters (1/16" at 20 feet). -
Page 17: Troubleshooting
The symptom may be caused by low or dead batteries. The laser does not turn on • Check, change, charge the batteries. • If not the batteries, the laser should be returned to an authorized service center for service. Roteo 20HV/25H/35/35G - 1.2.0en Troubleshooting... - Page 18 • Remove the mount and clean the contacts. Unit cannot level. Check your set up. Top four LED's are flashing in sequence. • Unit is tipped beyond self-leveling range. • Unit is on unstable surface. Troubleshooting Roteo 20HV/25H/35/35G - 1.2.0en...
-
Page 19: Care And Transport
When transporting the product by rail, air or sea, always • At the recommended storage temperature range, use the complete original Leica Geosystems packaging, batteries containing a 10% to 50% charge can be transport container and cardboard box, or its equivalent, stored up to one year. -
Page 20: Cleaning And Drying
• Use with accessories from other manufacturers uses the equipment, to anticipate and avoid operational without the prior explicit approval of Leica Geosys- hazards. tems. • Inadequate safeguards at the work site, for example when using on or near roads. -
Page 21: Limits Of Use
• To be familiar with local regulations relating to safety Suitable for use in an atmosphere appropriate for perma- and accident prevention. nent human habitation: not suitable for use in aggressive • To inform Leica Geosystems immediately if the or explosive environments. product and the application becomes unsafe. DANGER... - Page 22 Precautions: When setting-up the product, make sure that the acces- sories are correctly adapted, fitted, secured, and locked in position. Avoid subjecting the product to mechanical stress. Safety Directions Roteo 20HV/25H/35/35G - 1.2.0en...
- Page 23 If the product is improperly disposed of, the Using a battery charger not recommended by following can happen: Leica Geosystems can destroy the batteries. This can cause fire or explosions. • If polymer parts are burnt, poisonous gases are produced which may impair health.
-
Page 24: Laser Classification
Product specific treatment and waste management information can be downloaded from the Leica Geosys- Roteo 20HV/25H/35/35G tems home page at http://www.leica-geosystems.com/ The rotating laser produces a visible red/green laser treatment or received from your Leica Geosystems beam which emerges from the rotating head. - Page 25 Labelling, Laser Class 3R (Roteo 20HV/25H/35) Description Value Maximum radiant power < 2.7 mW c.w. Laser Aperture Pulse duration (effective) 4.5, 2.2, 1.5, 1.1 ms Pulse repetition frequency 0, 2.5, 5, 7.5, 10 rps Wavelength - Roteo 20HV/25H/35 620-690 nm...
-
Page 26: Electromagnetic Compatibility (Emc)
Laser Radiation Although the product meets the strict regulations and Avoid direct eye exposure standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility Class 3R Laser Product according to that other equipment may be disturbed. -
Page 27: Fcc Statement, Applicable In U.s
Changes or modifications not expressly approved computer, must be connected at both ends. by Leica Geosystems for compliance could void the user's authority to operate the equipment. FCC Statement, Applicable in U.S. WARNING... - Page 28 (2) CH-9435 Heerbrugg this device must accept any interference Manufactured: S.No.: Leica Geosystems AG received, including interference that may Made in China CH-9435 Heerbrugg cause undesired operation. Manufactured: S.No.: Made in China Safety Directions Roteo 20HV/25H/35/35G - 1.2.0en...
-
Page 29: Technical Data
-10 to +50°C 0 to +40°C -10 to +50°C Operating temperature (14 to +122°F) (32 to +104°F) (14 to +122°F) Storage temperature -20 to +70°C (-4 to +158°F) (without batteries) IP54, dust-proof, splash-proof Protection against water Roteo 20HV/25H/35/35G - 1.2.0en Technical Data... -
Page 30: International Limited Warranty
This product is subject to the terms and conditions set Batteries one AA alkaline battery*** out in the International Limited Warranty which you can download from the Leica Geosystems home page at RRC-350 IR Remote Receiver Control http://www.leica-geosystems.com/internationalwarranty Batteries a 9-volt type alkaline battery*** or collect from your Leica Geosystems distributor. - Page 31 International Standards of Quality Management and Quality Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001). Ask your local Leica dealer for more information about our TQM program. Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 www.leica-geosystems.com...
Need help?
Do you have a question about the Roteo 20HV and is the answer not in the manual?
Questions and answers