Leica 3D Disto User Manual page 54

Line Extension Tool
54
Step Description
3. The assistant prompts for selecting a second line.
Select a second line.
The intersection point is proposed once a line is chosen:
4.
After was pressed, the intersection point is generated and the
connecting lines to the existing points are added.
5.
The Line Extension tool expands a line by a manually entered distance value.
Step Description
Line Extension end-point is computed as the 3-dimensional extra-
☞
polation of the selected line.
1. Target and measure two points or select an existing line.
2. Activate the CAD tools by a long tap on the line in the sketch are.
Select Line Extension.
3. The pop-up prompts for the extension length.
Enter a value and press Ok.
Software Applications