Operation
Toolbar description
Key
Function
Press to zoom in or out.
Press to adjust the brightness of the camera.
Press to display/hide all measured points.
Press to measure hidden points.
Select an offset tool in the pop-up:
Vertical offset: Measure one point on any vertical target.
•
Individual offset: Measure two points on a pole or other
•
hardware.
Offset ruler: Measure two points on the 3D Disto offset
•
point ruler.
An assistant leads through the workflow.
Press to take pictures for documentation purposes.
Press in dark conditions to change Pointfinder picture to edge
mode. Edges and corners will be highlighted in black.
Press to choose between different turn commands:
Turn 90° right
•
Turn 90° left
•
Turn ?°: Enter the horizontal angle by which the 3D Disto
•
should turn.
Horizon: 3D Disto goes to 0% slope in horizontal position.
•
Plumb up: This option can be used to plumb up a point by
•
setting up the 3D Disto exactly over it. Use the 90° mark-
ings on the 3D Disto socket for centring.
41