Leica 3D Disto User Manual page 45

Operation
Step Description
2.
Select line to be added to area and press
3.
Proceed that way for all lines and press
4. Pop-up appears to choose between the different options to define
the height:
Enter height:Enter a desired value and press OK.
•
Measure height:Pointfinder opens, target and measure a
•
point on floor with
measure the points anywhere on the floor or ceiling area. The
height appears in the results window.
Close list:The result is an area.
•
5. To change the height or to calculate the volume with a selected
area press
6.
Quit application by pressing
, followed by point on ceiling. You can
and proceed as described in the previous steps.
.
.
.
45