6.3.1
Projector, Start
Measure the Working
Area
Point Design
Software Applications
Workflow
Step
Description
1.
Press Menu » Applications » Projector.
2.
A pop-up offers three scan modes: horizontal, slope and vertical.
Select your preference according to the working area.
3.
Pointfinder opens to measure the working area.
Step
Description
1.
Measure all important objects that you want to consider (edges,
corners, etc.).
☞
For horizontal mode only: the first measured point defines the level
that all following points refer to.
2.
If
is enabled, press this key to close the outline. Then measure
further points of interest (slope mode only).
3.
When all points are measured, press
Step
Description
1.
A pop-up offers two options to define the projection points: Grid
mode for a regular pattern and Import mode for individual DXF or
CSV files.
☞
Use the
urement.
Grid mode
Step
Description
1.
Press
to start Grid mode.
2.
Pop-up appears to choose between Define new, Use last or
Measure.
key at any time to go back to the working area meas-
to continue.
63