Pointfinder - Leica 3D Disto User Manual

Three-dimensional measuring and projection system

Hide thumbs Also See for 3D Disto:

Table of Contents

5.3

Description

Operation

User layer

Default user layer is "Layer 0".

You can add up to 20 additional user layers within one measurement file.

•

The current (active) layer is highlighted.

Short press on the layers name makes this one the current layer.

•

Long press or double-click on the layers name will open the keypad to re-

•

name the layer.

Short press on this icon will hide this layer.

Short press on this icon will display the points and lines within this

layer.

Add a new layer.

Delete this layer.

Layer can't be deleted because either there is no second user layer,

or there are already points or lines within this layer.

Short press on the colour box will open the colour control panel.

Press on the desired colour box to change.

Pointfinder

The 3D Disto has an integrated camera. It is accessible by

camera image directly on the 3D Disto display. The crosshairs in the Point-

finder image allow precise targeting and measuring even if the laser beam is

not visible, for example over long distances or because of bright backlight

conditions.

and it shows the

Table of Contents