Leica 3D Disto User Manual page 22

Operating Principles
for the Sketch View
22
Element
Title bar
Main operation bar
Sketch area
Pointfinder
Results window
Toolbar
Status bar
Navigation cube and
tools
Selecting or Drawing Items
Ensure, that the navigation tools are deactivated.
☞
To select a point or line in the sketch: Click with the mouse or tap with
•
one finger.
To draw a line: Select a point with mouse, stylus or finger, slide to the
•
desired point and release.
Adjusting the Sketch View with Navigation Tools
Use the navigation tools to adjust the sketch view individually.
Description
Shows the running application and the active layer.
Tapping on the layer window opens the layer con-
trol window.
save and close files or running applications.
Contains the following buttons:
•
Menu Opens the menu to start applications
or to define settings.
•
DIST button Starts measurement or layout
of points.
•
Pointfinder Opens, closes and locks Point-
finder.
These keys are displayed during all applications.
Displays measured points, lines and areas and cor-
rect position of 3D Disto in relation to measured
points - either in foot print or unfold mode/face
mode.
Shows 3D Disto live video stream used to target
points and to take pictures.
Displays all results such as distances, heights,
slopes, areas, angles together with the corres-
ponding result choice key, for example
on the results opens the calculator.
Contains application-specific tool keys. Refer to "
Toolbar of the Standard Application (Measure)".
Displays status of connections, batteries, running
function mode and assistant support.
Changes perspective and scale of the sketch. Click
on a face, a corner or an edge of the cube for pre-
defined views. Use the navigation tools to adjust
the view individually.
Description of the System
. Tapping