Export And Import Of Data; Calculator - Leica 3D Disto User Manual

3.6.2
Data Export Step-by-
Step
Data Import Step-by-
Step
3.7
Using calculator
32

Export and Import of Data

Step Description
Export applies the distance unit setting to exported coordinates.
☞
This setting can be modified any time before an export is
executed.
☞ The import/export settings in the menu allow to set the coordin-
ates of the first measured point of each application. This setting
must be done before the first point in a new project (e. g. a new
scan) is measured; the setting does not apply retrospectively.
1.
Open File Manager, choose a folder or file and press
A key press on
DXF and DWG files: 2D, 3D
•
CSV file: editable, common tabular data format
•
TXT file: all results in editable ASCII format. Same content like
•
CSV file
JPG files of photos and Secure Points.
•
2. Export data is transferred to the Export folder in the directory My
Documents\Leica Geosystems\3D Disto on your PC.
Step Description
It is possible to import DXF files or table formats for some applica-
☞
tions.
Data should be prepared on the PC before importing. Only points
☞
are imported, no lines. Remove irrelevant data such as frames,
logos, coordinates, or orientation arrows in the DXF files before
importing them.
1. To access the Import folder, click on the 3D Disto Data icon on
your desktop.
2. Copy the CSV or DXF files to the Import folder.
3. Refer to "6.3 Projector" for more information.

Calculator

Tap on the result in the result window to start the calculator.
•
Another option is to press Menu » Calculator.
•
010862_003
generates a package of export files:
.
Instrument Setup