6.5
General
6.5.1
Description
Software Applications
Step
Description
1.
To initiate a Location Check press Menu » Applications » Loca-
tion » Check Location.
2.
If Secure Points are available, select Secure Point and press
3.
The 3D Disto will target the Secure Point automatically.
Check laser point position with target mark.
☞
If the laser point does not target the centre of the target
mark, a relocation is recommended.
4.
Proceed that way for checking further points.
5.
Press
to close Secure Point gallery.
Tool Kit
In addition to the standard applications this program features:
Comfort Plumbing,
•
Comfort Targeting,
•
Comfort Level,
•
Meter Mark,
•
Height Tracking, and
•
Parallel Line.
•
After each layout task the respective tool has to be restarted. A pop-up offers
to continue with the same reference or to measure a new one. Data is not
stored and cannot be imported or exported. Remote Control functionality is
not supported in these applications.
Comfort Plumbing
Comfort Plumbing allows plumbing any point up or down without standing
above it.
010899_001
.
69