Hazards Of Use - Leica 3D Disto User Manual

Person responsible
for the product
1.5
8
The person responsible for the product has the following duties:
To understand the safety instructions on the product and the instructions
•
in the User Manual.
To ensure that it is used in accordance with the instructions.
•
To be familiar with local regulations relating to safety and accident pre-
•
vention.
To inform Leica Geosystems immediately if the product and the applica-
•
tion becomes unsafe.
To ensure that the national laws, regulations and conditions for the oper-
•
ation of the product are respected.

Hazards of Use

NOTICE
Dropping, misusing, modifying, storing the product for long periods or
transporting the product
Watch out for erroneous measurement results.
Precautions:
▶ Periodically carry out test measurements, particularly after the product
has been subjected to abnormal use and before and after important
measurements.
WARNING
Distraction/loss of attention
During dynamic applications, for example stakeout procedures, there is a
danger of accidents occurring if the user does not pay attention to the envir-
onmental conditions around, for example obstacles, excavations or traffic.
Precautions:
▶ The person responsible for the product must make all users fully aware of
the existing dangers.
WARNING
Inadequate securing of the working site
This can lead to dangerous situations, for example in traffic, on building sites
and at industrial installations.
Precautions:
▶ Always ensure that the working site is adequately secured.
▶ Adhere to the regulations governing safety, accident prevention and road
traffic.
Safety Directions