Leica 3D Disto User Manual page 23

Toolbar of the Stand-
ard Application
(Measure)
Description of the System
Zoom by drawing a rectangular area
•
Zoom
•
Fit the whole model into the view
•
Pan the sketch
•
Rotate the sketch
•
Change the perspective
•
To activate a navigation tool: Click or tap on it. The selected tool is highlighted
and the cursor changes.
To deactivate a tool: Click or tap on it again.
Adjusting the Sketch View with the Navigation Cube
To adjust the sketch view: Also use the navigation cube.
•
To adjust the view individually: Click and drag the cube.
•
For pre-defined views: Click on a face, a corner or an edge of the cube .
•
011137_001
Gestures for Touch-Screen
If your device has a touch screen, you can use two-finger gestures for quickly
adjusting the sketch view without using the navigation tools:
Swipe:
011136_001
Rotate:
009111_001
Key Description
Enter and measure a reference height.
Start a line or surface scan.
Disable line drawing.
Go one point backward.
Zoom in:
009108_001
Zoom
out:
009110_001
23