Conformity To National Regulations - Leica 3D Disto User Manual

Power
Mounting
Instrument dimen-
sions
Weight
Environmental spe-
cifications
RM100 Remote Con-
trol
11.2
Conformity to
national regulations
Technical Data
Internal:
Type:
Voltage:
Charging time:
Typical operating time
External:
Voltage:
5/8" thread
186.6 mm × 215.5 mm (diameter × height)
2.8 kg
Temperature
Operating temperature:
Storage temperature:
Protection against dust, sand and water
IP54 (IEC60529)
Humidity
Protection:
Range:
Communication:
Battery

Conformity to National Regulations

FCC Part 15, 22 and 24 (applicable in US).
•
Hereby, Leica Geosystems AG, declares that the 3D Disto and the
•
RM100 are in compliance with the essential requirements and other rel-
evant provisions of Directive 2014/53/EU and other applicable European
Directives.
The full text of the EU declaration of conformity is available at the fol-
lowing Internet address: http://www.leica-geosystems.com/ce.
Class 1 equipment according to European Directive 2014/53/EU
(RED) can be placed on the market and be put into service
without restrictions in any EEA member state.
The conformity for countries with other national regulations not
•
covered by the FCC part 15, 22 and 24 or European Direct-
ive 2014/53/EU (RED) has to be approved prior to use and operation.
Li-Ion battery
14.4 V, 63 Wh
8 h
8 h
24 VDC, 2.5 A
-10°C to +50°C
-25°C to +70°C
Max 85 % r.h. non-condensing
30 m (depending on environment and opera-
tion conditions)
Infrared (IR)
1 AA, 1.5 V
85