Profinet Cable And Connector; Usb Cable; Connectors Used On The Drive Front Panel - Siemens SINAMICS V90 Operating Instructions Manual

General information
2.4 Accessories
2.4.2

PROFINET cable and connector

The cable is used to connect the drive to a controller.
Name
SINAMICS V90 PROFINET I/O connector (20 pins)
SINAMICS V90 PROFINET I/O cable (20 pins)
RJ45 data plug-in connector, with 180° (straight) cable
outlet
Standard bus cable (4-core), sold by meter, not assem-
bled
Preassembled PROFINET cable, with two RJ45 plug-180
connectors
The wire color of the PROFINET I/O cable exposed side, see Section "Control/status
1)
interface - X8 (Page 109)".
2.4.3

USB cable

The USB cable is used to connect the drive to a PC for commissioning the drive directly from
the PC.
Name
USB cable
2.4.4

Connectors used on the drive front panel

If you need a new connector that used on the drive front panel, you can order a connector kit
from Siemens.
Connector kits
Illustration
200 V variant
400 V variant
You can obtain the connectors for SINAMICS V90 400V servo drives of FSB and FSC from the
1)
connector kits for SINAMICS V90 400V servo drives of FSAA or FSA.
42
Article number
6SL3260-2MA00-0VA0
6SL3260-4MA00-1VB0
1)
6GK1901-1BB10-2AA0
6XV1840-2AH10
6XV1871-5BH10
Article number
6SL3255-0AA00-2CA0
Used for (SINAMICS servo drive)
FSA, FSB
FSC, FSD
FSAA
FSA
Operating Instructions, 04/2020, A5E37208830-008
Length (m)
-
1
-
-
1
Length (m)
3
Article number
6SL3200-0WT02-0AA0
6SL3200-0WT03-0AA0
6SL3200-0WT00-0AA0
6SL3200-0WT01-0AA0
SINAMICS V90, SIMOTICS S-1FL6