Setpoint Connector Assembly - Siemens SINAMICS V90 Operating Instructions Manual

Appendix
A.2 Assembly of cable terminals/connectors on the drive side
A.2.4

Setpoint connector assembly

NOTICE
Drive damage resulting from the short-circuiting between the shielding wire and the unused
pin on the setpoint connector
The shielding wire may inadvertently be short-circuited to the unused pin on the to-be-
assembled setpoint connector. This can cause damage to the drive.
• When assembling the connector, exercise caution when connecting the shielding cable
340
to the setpoint connector.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2020, A5E37208830-008