6.5
Auxiliary functions
In total, there are six BOP functions available:
①
Jog
②
Save parameter set in drive
③
Restore parameter values to default
④
Copy parameter set from a drive to a mi-
cro SD card/SD card
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2020, A5E37208830-008
Basic operator panel (BOP)
⑤
Copy parameter set from a micro SD
card/SD card to a drive
⑥
Update firmware
⑦
Adjust absolute encoder
NOTE:
This function is available only when the
servo motor with an absolute encoder is
connected.
6.5 Auxiliary functions
151