Saving Parameters (Ram To Rom) - Siemens SINAMICS V90 Operating Instructions Manual

6.5.2

Saving parameters (RAM to ROM)

This function is used for saving a parameter set from the drive RAM to the drive ROM.
To use this function, proceed as follows:
Note
Plugging or unplugging the micro SD card/SD card will cause saving failure.
Do not plug or unplug the micro SD card/SD card during saving; otherwise, the saving
operation will fail.
Note
• If a micro SD card/SD card has been inserted, the parameter set will be saved onto the
micro SD card/SD card simultaneously.
• All signal functions become inactive during the saving process. Use the signal functions
afterwards.
Reference
Editing parameters (Page 148)
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2020, A5E37208830-008
Basic operator panel (BOP)
6.5 Auxiliary functions
153