Rs232 Interface; Ethernet Interface; Figure 2 - Rmc30 Phoenix Serial Connector, Rs485 2 Wire Connection; Figure 3 - Rmc30 Rs232 Connection - Siemens Ruggedcom RMC30 Technical Guidance Notes

2.2.2

RS232 Interface

If required you can connect the RS232 port of the RMC30 to a PC, for example, if you cannot
configure the device via the Ethernet connection, as shown below.
2.2.3

Ethernet Interface

Connect the RMS30 to the network using a standard RJ45 Ethernet cable.
©2007 Siemens Protection Devices Limited
Figure 2 – RMC30 Phoenix Serial Connector, RS485 2 wire connection
Figure 3 – RMC30 RS232 connection
Technical Guidance Notes
Page 7 of 29