Siemens SINAMICS V90 Operating Instructions Manual page 8

Preface
● Siemens shall not be liable for any damage arising from infringements of intellectual
property rights or other proprietary rights of third parties as a result of using the
information described in catalogs or manuals.
● The indemnity obligation of Siemens for all losses of the customer attributable to Siemens
does not exceed the total amount paid by the customer for purchasing the relevant
product.
Suitability for use
● It is the customer's responsibility to confirm conformity with any standards, codes, or
regulations that apply if the Siemens product is used in combination with any other
products.
● The customer must confirm that the Siemens product is suitable for the systems,
machines, and equipment used by the customer.
● Consult with Siemens to determine whether use in the following applications is
acceptable. If use in the application is acceptable, use the product with extra allowance in
ratings and specifications, and provide safety measures to minimize hazards in the event
of failure.
– Outdoor use, use involving potential chemical contamination or electrical interference,
– Nuclear energy control systems, combustion systems, railroad systems, aviation
– Systems, machines, and equipment that may present a risk to life or property
– Systems that require a high degree of reliability, such as systems that supply gas,
– Other systems that require a similar high degree of safety
● Never use the product for an application involving risk to life or property without first
ensuring that the system is designed to secure the required level of safety with risk
warnings and redundancy, and that the Siemens product is properly rated and installed.
● The circuit examples and other application examples described in product catalogs and
manuals are for reference. Check the functionality and safety of the actual devices and
equipment to be used before using the product.
● Read and understand all use prohibitions and precautions, and operate the Siemens
product correctly to prevent accidental harm to third parties.
● Adhere to the instructions including but not limited to product manuals and safety notices
during the use of the product. Siemens does not accept any liability for personal injuries,
property damage, legal disputes or interest conflicts arising from non-adherence to
product manuals and safety notices or arising from Force Majeure.
Specifications change
The names, specifications, appearance, and accessories of products in product catalogs and
manuals may be changed at any time based on improvements and other reasons. The next
editions of the revised catalogs or manuals will be published with updated code numbers.
Consult with your Siemens representative to confirm the actual specifications before
purchasing a product.
6
or use in conditions or environments not described in product catalogs or manuals
systems, vehicle systems, medical equipment, amusement machines, and
installations subject to separate industry or government regulations
water, or electricity, or systems that operate continuously 24 hours a day
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2020, A5E37208830-008