Siemens SINAMICS V90 Operating Instructions Manual page 144

Basic operator panel (BOP)
6.1 BOP overview
Display Example
S Off
Para
P xxxx
Data
Func
Jog
Save
defu
dr--sd
sd--dr
Update
ABS
A.B.S.
r xxx
r -xxx
T x.x
142
Description
Operating display: servo off
Editable parameter group
Parameter group
Read-only parameter group
Function group
Jog function
Save data in drive
Restore drive to default settings
Save data from drive to micro SD
card/SD card
Upload data from micro SD card/SD
card to drive
Update firmware
The zero position has not been set
The zero position has been set
Actual speed (positive direction)
Actual speed (negative direction)
Actual torque (positive direction)
Remarks
Refer to the section "Editing parameters
(Page 148)".
Five groups are available:
1. P APP: application
2. P BASE: basic
3. P CON: communication
4. P EPOS: basic positioner
5. P ALL: all parameters
Refer to "Viewing parameters (Page 150)".
Refer to "Auxiliary functions (Page 151)".
Refer to "JOG (Page 152)".
Refer to "Saving parameters (RAM to ROM)
(Page 153)".
Refer to "Setting parameters to default
(Page 154)".
Refer to "Transferring data (drive to SD)
(Page 155)".
Refer to "Transferring data (SD to drive)
(Page 156)".
Refer to "Updating firmware (Page 157)".
Refer to "Adjusting an absolute encoder
(Page 158)".
Refer to "Adjusting an absolute encoder
(Page 158)".
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2020, A5E37208830-008