Preface - Siemens SINAMICS V90 Operating Instructions Manual

Preface

Documentation components
Document
Operating Instructions
SIMOTICS S-1FL6 Servo Motors Instal-
lation Guide
SINAMICS V90 Servo Drives Information
Guide
SINAMICS V90 V-ASSISTANT Online
Help
Target group
This manual provides information about the SINAMICS V90 PN servo system for planners,
operators, mechanical engineers, electrical engineers, commissioning engineers, and
service engineers.
Technical support
Country
China
Germany
Italy
India
Turkey
Further service contact information:
Support contacts (https://support.industry.siemens.com/cs/ww/en/)
Product maintenance
The components are subject to continuous further development within the scope of product
maintenance (improvements to robustness, discontinuations of components, etc.).
These further developments are "spare parts-compatible" and do not change the article
number.
In the scope of such spare parts-compatible further developments, connector positions are
sometimes changed slightly. This does not cause any problems with proper use of the
components. Take this fact into consideration in special installation situations (e.g. allow
sufficient clearance for the cable length).
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2020, A5E37208830-008
Content
(this manual)
Describes how to install the SMOTICS S-1FL6 servo
motor and relevant safety notices.
Introduces the basic information of the documentation and
describes how to find all the SINAMICS V90 documenta-
tion from the website.
Describes how to perform fast commissioning and diag-
nostics for the SINAMICS V90 drives via the SINAMICS
V-ASSISTANT engineering tool.
Hotline
+86 400 810 4288
+49 911 895 7222
+39 (02) 24362000
+91 22 2760 0150
+90 (216) 4440747
3