Configure Rmc30 Modbus Parameters; Figure 13 - Rmc30 Ip Address Changed; Figure 14 - Rmc30 Admin Logout Screen - Siemens Ruggedcom RMC30 Technical Guidance Notes
Ethernet interface
Hide thumbs
Also See for Ruggedcom RMC30:
- Installation manual (36 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
Technical Guidance Notes
Figure 13 – RMC30 IP Address Changed
Press CTRL+X to exit the logout.
Figure 14 – RMC30 Admin Logout Screen
Reboot the RMC30
3.2
C
RMC30 MODBUS P
ONFIGURE
ARAMETERS
To configure parameters, start up a web browser and attach to the IP address set in section 3.1, in this
example 169.254.199.24. You will be presented with the initial page as shown below.
©2007 Siemens Protection Devices Limited
Page 13 of 29
Advertisement
Table of Contents
