Standard Control Panel Hap01.1N - Bosch Rexroth IndraDrive CSB02 Project Planning Manual

78/143 Bosch Rexroth AG
Optional connection points
7.17.3

Standard Control Panel HAP01.1N

Description
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
For a detailed description of the control panel, see the documen‐
tation "Application Manual, Functions" of the firmware used.
In the future, the standard control panel HAP01.1N will be re‐
placed by the standard control panel HAP01.1E.
Fig. 7-9: Standard Control Panel HAP01.1N
The standard control panel
● has a single-line display
● must have been plugged in when the drive controller is switched on so
that it can be recognized (not suited for hot plug)
● can be used as programming module
● The display shows operating states, command and error diagnoses and
pending warnings.
● Using the four keys, the commissioning engineer or service technician
can have extended diagnoses displayed and trigger simple commands.
● Memory
– 400 kbytes for MLD boot program
– 492 bytes for MLD retain variables
DOK-INDRV*-CXX02******-PR03-EN-P