Table of Contents
Advertisement
88/143
Bosch Rexroth AG
Technical data - functions
SSI (12 V supply voltage)
Connection diagram
Power supply
Cable length
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
See the connection diagram for how to connect the encoder system.
1)
Line cross section ≥ 0.5 mm²; observe allowed encoder cable
length
2)
Line cross section ≥ 0.14 mm²
Fig. 8-10:
Connection diagram SSI encoder system
12 V (the voltage is made available via the EC interface)
Technical specification of the power supply: See
on page 92
The maximum allowed cable length depends on several factors: See
8.1.4 "Encoder cable length" on page 94
DOK-INDRV*-CXX02******-PR03-EN-P
chapter "12 V power supply"
chapter
Advertisement
Table of Contents
