Table of Contents
Advertisement
DOK-INDRV*-CXX02******-PR03-EN-P
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
1V
according to Heidenhain standard (5 V supply voltage)
pp
Connection diagram
Power supply
Cable Length
Technical properties
See the connection diagram for how to connect the encoder system.
1)
Line cross section ≥ 0.5 mm²; observe allowed encoder cable
length
2)
Line cross section ≥ 0.14 mm²
Fig. 8-5:
EC connection diagram with 1V
For direct connection to the encoder system, use our RKG0035
cable.
5 V (the voltage is made available via the EC interface)
Technical specification of the power supply: See
on page 92
75 m at most (when using the Sense function)
When you do not use the Sense function, the maximum cable length is re‐
duced (see
chapter 8.1.4 "Encoder cable length" on page
Use the Sense function to ensure stable power supply at the encoder. De‐
scription of the Sense function: See
Bosch Rexroth AG
Technical data - functions
encoder system
pp
chapter "5 V power supply"
94).
chapter "5 V power supply" on page 92
83/143
Advertisement
Table of Contents
