Warning Labels On The Instrument - SYSMEX pocH-100i Instructions For Use Manual

7.1.6. Warning labels on the instrument

Warning
• This equipment must be grounded.
• To avoid electrical shock, disconnect supply before
servicing.
• For the continued protection against risk of fire, re-
place only with fuse of the specified type and current
ratings.
• Never open the instrument's cover on the back when
the power switch is on. Do not open this cover unless
absolutely necessary. There are no user serviceable
parts inside.
Warning
Contact with static electricity at the lower left part at the
front side may result in abnormal instrument operation.
During operation, do not touch any parts other than the
contrast adjustment lever.
Warning, Hot
The printer head may get very hot.
Warning
Static electricity may damage the printer head.
Do not touch.
Warning
When opening the detector cover to clean the trans-
ducer aperture, follow the instructions in chapter "Clean
aperture of TD chamber" page 4-13.
Because there is a risk of electric shock, do not open
this cover for any other purposes.
Warning
• Static electricity may damage the electronic circuit via
the connectors on the right side. Do not touch connec-
tor pins with hands.
• Turn the main switch OFF before inserting or removing
connectors or program cards.
i 7 - 4
pocH-100 Revised June 2008