Host Settings - SYSMEX pocH-100i Instructions For Use Manual

5.1.2.6. Host settings

To set data output to host computer.
Press "Menu" > "Settings" >
"Host Output".
Press "Menu" > "Settings" > "Host Output".
Parameter
Disable / Serial / LAN
Connect
Enable / Disable
Automatic Output
pocH / KX-21N / ASTM / K-1000
Format
1200 bps / 2400 bps
Transfer Rate
Data Length 7 bits / 8 bits
Stop bit 1 bit / 2 bits
Parity Even / Odd / Disable
Protocol Class A / Class B
Transfer Interval 0 s / 2 s / 3 s / 5 s / 7 s / 10 s / 15 s
RTS/CTS Enable / Disable
ID Pad. 0 pad / SpacePad.
RDW RDW-SD / RDW-CV
ASTM Rev. 1381-95 / 1381-02
Setting
/ 4800 bps / 9600 bps / 19200 bps
Note
The underscored items are factory settings.
i
pocH-100 Revised June 2008
5 - 6