Replace Reagent - SYSMEX pocH-100i Instructions For Use Manual

4.1. CLEANING

4.1.13. Replace reagent

As needed
The screen displays "Replace
pocH-pack65".
1
The screen displays "Replace pocH-pack65".
Insert the container spout kit
into the new pocH-pack 65.
2
Insert the container spout kit into the new
pocH-pack 65. T ighten the cap.*
Press "Execute".
3
Press "Execute".
Enter reagent barcode by bar-
code reader and proceed to step
7 or press "Manual".
4 7
Enter reagent barcode by barcode reader
and proceed to step 7 or press "Manual".
Enter barcode of the new rea-
gent bottle
5 8
Enter barcode of the new reagent bottle.
Press "OK".
6
Press "OK".
Press "Execute".
When handling (disposing) the waste fluid,dispose
it appropriately in accordance to local laws and
regulations, which considers for the disposal of
medical waste and infectious waste.
• Use reagent at 15–30°C.
Press "Execute".
Leave reagents at room temperature for at least
24 hours or longer before using. If a refrigerated
reagent is used, a correct analysis result will not
be obtained.
After replace menu process, dis-
• For detailed information about storage & shelf
play shows start screen.
life, please see "The reagents" page 1-4.
• Waste fluid may discolor some materials.
• If the waste fluid is spilt, wipe off with the damp
cloth immediately.
• Clean spills according to your policies and proce-
dures.
After replace menu process, display shows
start screen.
• Do not to touch the pipe with your hands, or
to allow dust or other substances to adhere to
them. If such substances adhere to the pipe,
wash the substance off with reagent first before
attaching the container spout kit.
Failure to do so may lead to erroneous results.
• Be careful to prevent the reagent from spilling.
If the reagent spills, immediately wipe it off with
a damp cloth.
* This is image of the pocH-pack 65. The pocH-pack
65XL does not have waste container.
Biological risks
Incorrect analysis results
Caution
Important
i
pocH-100 Revised February 2011
4 -12