SYSMEX pocH-100i Instructions For Use Manual page 52

3.2. PERFORMING QUALITY CONTROL
3.2.3. STEP 3: a) Performing quality control: L-J method (factory setting) (for open pipette)
Daily
Press "QC".
1
Press "QC".
Select analyzing File.
2
Select analyzing File.
Open sample position.
3
Open sample position.
The sample tube caps have to be removed
before measurement.
3-11 i
pocH-100 Revised February 2011
Set the spacer to an adapter.
4 7
Set the spacer to an adapter.
Insert adapter.
5 8
Insert correct adapter.
Remove the cap.
6
Remove the cap.
Insert control blood and close
the door.
Insert control blood and close door.
Press "Run".
Press "Run".
The analysis starts.
9
The analyzing screen will appear.
Press " " or " " to scroll
screens.
10
Press " " or " " to scroll the results screens.
Press "Quit".
11
Press "Quit" to accept analysis results.
Depending on QC settings, results will be
printed/sent to host computer automatically.