SYSMEX pocH-100i Instructions For Use Manual page 33

Incorrect analysis results
All performance data cited in this manual were
generated using specimens in EDTA anticoagulant.
Results may differ using other anticoagulants.
Important
• When using micro tubes, place them in the cor-
rect adapter and make sure the cap is removed.
• When a sample tube with a cap is used, manually
remove the cap before analysis.
The pipette might be permanently damaged, if
*
the cap was not removed.
1
. Do not open the sample position while aspi-
rating!
Note
The sample ID can be set up to 15 characters. If a sam-
ple's ID is set to „0", the result for this sample will not
be stored.
i 2 - 8
pocH-100 Revised February 2011