Power Cord; Switch On - SYSMEX pocH-100i Instructions For Use Manual

1.3.6. Power cord

Insert cable into socket.
1
Insert cable into socket.
Insert cable into an AC outlet.
2
Insert cable into an AC outlet.
Danger, electric shock
Improper grounding of the instrument
can cause electrical shock.
Important
The instrument runs on 100-250V AC,
50/60Hz.

1.3.7. Switch ON

When the main switch is turned ON the first time, supply the reagents into the
instrument.
Switch ON.
1
Switch ON.
The instrument performs:
2 1. a rinse cycle
2. a background check
Ready after 6-11 minutes.
3
Ready after 6-1 1 minutes.
Note
In this section, only the settings relevant
for installation are described. For details
on all possible settings see "Settings &
Calibration" page 5-1.
i
pocH-100 Revised June 2008
1- 14