Stored Data - SYSMEX pocH-100i Instructions For Use Manual

2.1. ANALYSIS

2.1.9. Stored data

The most recent 100 analysis results are automatically stored and can be recalled.
If there are 100 results stored, the fresh set will cancel the oldest.
Press "Menu".
1
Press "Menu".
Press "Str. Data".
2
Press "Str. Data".
The first list screen
3
Choose stored data (cursor sample). Switch
to second list screen for current cursor sam-
ple by pressing " ".
2 -13
pocH-100i Revised February 2011
The second list screen
4
Switch to third list screen for current cursor
sample by pressing " ".
The third list screen
5
Switch to fourth list screen, and to first
stored data screen for current cursor sample
by pressing " ".
First stored data screen
6
Switch to second, third and fourth stored
data screen by pressing " ".
In the list screens and the stored data screens, the
data can only be displayed in the order of the op-
eration counter.
Sample ID attribute
M: number entered manually
A: number assigned automatically
B: number read out by barcode reader
Cursor sample
Analysis data for following parameters:
First stored data screen WBC, RBC, HGB, HCT, PLT
Second stored data screen WBC, RBC, HGB, HCT, MCV, MCH, MCHC, PLT
WBC, LYM% (W-SCR), MXD% (W-MCR), NEUT% (W-LCR),
Third stored data screen
LYM# (W-SCC), MXD# (W-MCC), NEUT# (W-LCC)
Fourth stored data screen RBC, MCV, RDW-SD, RDW-CV, PLT, PDW, MPV, P-LCR
Important
Analysis mode
Memory No./No. of samples